Home / Waveform Files / Load Waveform

• Home
• Getting Started
• Information
• Setup
• Using the Graphical User Interface
• Application Window
• Waveform Files
  • Load Waveform
  • Save Waveform
  • Waveforms
  • User Defined Waveforms
• Operation Details
• Single Board Operation
• Multiple Board Operation
• Advanced
• Troubleshooting
• Contact Us
• Euvis Inc.

Load Waveform -

» With the program open, click on the Waveform tab if you are not already in the Waveform Panel.

» Click on the pull-down menu and select one of the saved waveforms. After clicking on the waveform, the board will output the waveform if "Auto Download" has been enabled. If it is not enabled, click on the Download button near the bottom of the window or click on File --> Load Waveform.

» After you change any parameters, please press the Download button again, and then restart the waveform (from the right-click pop-up menu).