Home / Setup / Hardware Setup

• Home
• Introduction
• Setup
  • First Powerup Checklist
  • Software Requirements
  • Software Setup
  • Hardware Requirements
  • Hardware Setup
• Application Window
• Operation Details
• Using the GUI
• Single Board Operation
• Contact Us
• Euvis Inc.

Hardware Setup-

» Connect your spectrum analyzer to the OUT horizontal SMA connector.

» Set the DDS clock source to the desired frequency with 3 dBm power. Connect the clock to the DDSCK vertical SMA connector.

» Set the carrier frequency clock source to the desired frequency with 6 dBm power. Connect the clock to the LO horizontal SMA connector.

» Connect the DSM board to your PC with the USB A-B cable.

» Plug the AC adapter to a wall outlet and connect the power jack to the connector on the board.

» If you have done everything correctly, you should see the built-in waveform output on your spectrum analyzer.