Welcome

Welcome to the Euvis DST501 Manual. Before doing anything else, please see the First Powerup Checklist section to ensure that you have a working DST board.


The DST module is functionally very similar to the DSM module and thus shares most of the same functions. The two functions that the DST has that is absent in the DSM is the ability to output a modulated signal with sideband selection and the ability to change the startup waveform. Below are the links to the two different features in this manual.


NOTE:
When powering up the DST501 module, do not connect the USB cable until the startup waveform has been loaded. If you connect the USB cable before the waveform loads, Windows will detect the module as an "Unknown Device" in the Device Manager. Depending on the length of the waveform, it may take up to 4 minutes to download the longest possible waveform. After the startup waveform has loaded, the module will be detected as "Euvis DSM". Also, when starting the GUI, there will be a short 5 to 10 second delay before the GUI window loads.


Please use the menu on the left to navigate through this manual.If you have problems, please feel free to contact us. You can get our contact information by clicking on "Contact Us" in the menu to the left.

Quickstart