Home / Using the GUI / Loading Waveform

• Home
• Introduction
• Setup
• Application Window
• Operation Details
• Using the GUI
  • Loading Waveforms
  • Loading User-Defined Waveforms
  • Saving Waveforms
  • Startup Waveforms
• Single Board Operation
• Contact Us
• Euvis Inc.

Loading Waveform -

There are two ways you can load waveform files. The first way, which is detailed below, is simply loading a saved .wf file from a previous session with the GUI application. The second way is to load a custom waveform that you have created. To see how to create and load a custom user file, please go to the User Files page in this section.

» With the program open, click on the Waveform tab if you are not already in the Waveform Window.

» Click on the pull-down bar and select one of the saved waveforms.

» After clicking on the waveform, waveform parameters in the file will be loaded into the GUI.

» Please note that at this point, that waveform still has not been downloaded to the DSM. In order to do this, you will need to click on the Download button.