Home / Using the GUI / Operating Conditions

• Home
• Introduction
• Setup
• Application Window
• Using the GUI
  • Operating Conditions
  • Waveform Generation
• Contact Us
• Euvis Inc.

Operating Conditions -

Before powering the WM401 module, make sure proper operating conditions are met:

1. Make sure the software is set up properly.

2. Make sure your cooling fan has proper airflow (20cfm) and is blowing air across the MUXDAC.

3. Make sure the hardware is set up properly.

With these 3 conditions met, the WM401 is ready to be operated. Plug in the power and run the WM401 GUI.